Epson U925 User Manual - Page 49

Notes on MICR use ❏ Personal checks are fed in the forward direction only. ❏ The paper roll must be loaded correctly before selecting MICR function. Otherwise, check paper is not fed properly. ❏ The check waiting state is canceled using DLE ENQ 3. ❏ After a personal check is ejected, the SLIP light comes on and the printer does not proceed to the next operation until the check is removed. ❏ The check waiting time and the interval from when a check is inserted to when the operation starts can be set using ESC f. ❏ To check the MICR function status exactly, use DLE EOT BS 1. ❏ Remove ejected personal checks by pulling them upward. Do not pull them out in the horizontal direction. Paper Specifications Paper feed method: Paper feed pitch: Paper feed speed: Paper size: Friction feed Default 4.23 mm {1/6 inch} Can be set in units of 0.353 mm {1/144 inch} by the ESC 3 and ESC J commands. Approx. 60.3 ms/line (4.23 mm {1/6 inch} feeding) Approx. 86.36 mm/second {3.4 inches/second} (continuous feeding) Paper roll (single-ply) Reference Information 4-5