Epson U925 User Manual - Page 34
FS a 0, Using the Printer, face down
 |
View all Epson U925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
CAUTION: Do not insert checks with staples in them. This may cause paper jams, MICR reading errors, and damage to the MICR head. Be sure that the checks are flat, without curls, folds, or wrinkles. 1. Wait until the computer sends the FS a 0 command to the printer, causing it to enter the MICR mode. The SLIP light blinks. 2. Turn the check over so that it is face down with the MICR characters on the righthand side, as shown in the illustration below. The MICR characters must be next to the right edge of the paper inlet. MICR characters must be on the underside of this edge of the check 3. Insert the check straight into the paper inlet, using the right edge of the paper inlet as a guide. 2-6 Using the Printer
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29 -
30 -
31 -
32 -
33 -
34 -
35 -
36 -
37 -
38 -
39 -
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
 |
 |
2-6
Using the Printer
CAUTION:
Do not insert checks with staples in them. This may cause
paper jams, MICR reading errors, and damage to the MICR
head.
Be sure that the checks are flat, without curls, folds, or
wrinkles.
1.
Wait until the computer sends the
FS a 0
command to the
printer, causing it to enter the MICR mode. The
SLIP
light
blinks.
2.
Turn the check over so that it is
face down
with the MICR
characters on the righthand side, as shown in the illustration
below. The MICR characters must be next to the right edge of
the paper inlet.
3.
Insert the check straight into the paper inlet, using the right
edge of the paper inlet as a guide.
MICR characters must be on the underside
of this edge of the check