Epson U925 User Manual - Page 45

Chapter 4 Reference Information Printing Specifications Printing method: Head wire configuration: Serial impact dot matrix 9-pin vertical line, 0.353 mm {1/72"} wire pitch Head wire diameter: 0.29 mm {.01"} Printing direction: Bidirectional, minimum distance printing Printing speed: See table on page 4-2. Characters per line: See table on page 4-2. Characters per inch: See table on page 4-2. Print modes: See the print modes table below. Print modes Print mode Printing speed*1 Print head energizing time Paper roll Slip paper Default status Switching*2 Default status Switching*2 Normal Low speed High Low Normal Normal Depends Possible -- on DIP SW 2-4 Possible -- Possible Possible Copy Low Copy (long) -- Possible Selected Possible Note: *1 The printer automatically goes to low speed mode during bit image printing, regardless of the type of selected paper. *2 Print mode can be changed using the GS E command. Reference Information 4-1