Epson U925 User Manual - Page 30
Indicator lights, SLIP FEED, POWER, ERROR
View all Epson U925 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
SLIP FEED You cannot load slip paper using this button. Slip paper can be loaded only by selecting slip paper with a command and then inserting the paper. When the printer is in the slip paper mode (the SLIP light is on or blinking) and slip paper is inserted, you can press the SLIP FEED button once to advance slip paper one line or hold down SLIP FEED to feed slip paper continuously. Indicator lights The control panel lights provide information on printer conditions. POWER (green) The POWER light is on when the printer power is on. ERROR (red) The ERROR light is on or blinking when the printer is not ready to print. The ERROR light is on (not blinking) under the following conditions: ❏ When the printer is first turned on or reset through the interface. The light goes off as soon as the printer is initialized. ❏ When the printer cover is open. ❏ When the printer is at or near the end of a roll of paper. The ERROR light blinks under the following conditions: ❏ When the print head is overheated. If this happens, the printer waits until the print head cools and then resumes printing. ❏ When an error occurs. For more information on error conditions, see Chapter 4, "Troubleshooting." 2-2 Using the Printer