Epson WorkForce Pro WF-C878R Users Guide - Page 344
Cleaning the Print Head Using the Product Control Panel, Print Head Maintenance
![]() |
View all Epson WorkForce Pro WF-C878R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
• If there are gaps or the pattern is faint, select X and continue. • If there are many lines missing, you should run a Power Cleaning. 8. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the process as necessary. Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not be able to print. If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing. Then try cleaning the print head again. If quality still does not improve, one of the ink packs may be old or damaged and needs to be replaced. You can also try running a Power Cleaning. Parent topic: Print Head Maintenance Related tasks Cleaning the Print Head Using the Product Control Panel Power Cleaning Using the Product Control Panel Related topics Loading Paper Cleaning the Print Head Using the Product Control Panel You can clean the print head using the control panel on your product. Note: You cannot clean the print head if ink is expended, and may not be able to clean it when ink is low. You must replace the ink pack first. 1. Make sure there are no errors on the LCD screen. 2. Load a few sheets of plain paper in the product. 3. Press the home button, if necessary. 4. Select Settings > Maintenance > Print Head Cleaning. 344
![](/manual_guide/products/epson-workforce-pro-wfc878r-users-guide-4d18f30/344.png)