Epson WorkForce Pro WF-C878R Users Guide - Page 387

Parent topic: Solving Problems Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it from the rear paper feeder or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette or rear paper feeder. • Be sure to insert the paper cassette all the way into your product. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • Do not load more than the recommended number of sheets. • Make sure your paper meets the specifications for your product. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • Make sure the paper size and paper type settings are correct for the paper source. • Run the paper guide cleaning utility to clean the paper path. • Clean the roller inside the printer to remove any dust on the paper path. • If paper does not feed correctly after replacing the maintenance rollers, make sure you installed the maintenance rollers correctly. • If you installed an optional paper cassette unit, be sure to enable the cassette unit in the printing software. • If your product pauses during printing, make sure the front cover is closed. • The maintenance rollers may be at the end of their service life. Check the maintenance roller status and replace them if necessary. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in the cassette printable side down. • Do not load binder paper with holes in the cassette. • Follow any special loading instructions that came with the paper. Parent topic: Solving Paper Problems Related references Paper Jam Problems 387