Epson WorkForce Pro WF-C878R Users Guide - Page 82
Configuring Email Server Settings, Network Environment Messages, Message, Solution, Parent topic
View all Epson WorkForce Pro WF-C878R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Network Environment Messages Message Solution The Wi-Fi environment needs to be improved. Turn the wireless router off and then turn it on. If the connection does not improve, see the documentation for the wireless router. Move your product closer to your router or access point, and remove any obstacles between them. Then turn off your router or access point, wait about 10 seconds, and turn it back on again. If you still cannot connect to your product, check the documentation that came with your router or access point for solutions. *No more devices can be connected. You can connect up to 8 computers or other devices to Disconnect one of the connected devices if your product using a Wi-Fi Direct (Simple AP) connection. you want to add another one. If you want to add another device, disconnect an existing connected device first. The same SSID as Wi-Fi Direct exists in the environment. Change the Wi-Fi Direct SSID if you cannot connect a smart device to the printer. Change the Wi-Fi Direct SSID. Parent topic: Printing a Network Connection Report Configuring Email Server Settings To use features such as scanning to email or forwarding faxes to email, you need to configure the email server. You can select settings for the email server using the control panel on the product. Note: These settings can be locked by an administrator. If you cannot access these settings, contact your administrator for assistance. 1. Press the home button, if necessary. 2. Select Settings > General Settings > Network Settings > Advanced > Email Server > Server Settings. 82