Epson WorkForce WF-3530 User Manual - Page 264

4. Select one of these options: • Reset Fax Send/Receive Settings: Resets all settings on the Send Settings, Receive Settings, and Communication screens. • Reset Fax Data Settings: Erases the speed dial list, group dial list, header, and fax log. • Wi-Fi/Network Settings: Resets all network settings. • Reset All except Network & Fax Settings: Resets all control panel settings, except for network and fax settings. • All Settings: Resets all control panel settings. You see a confirmation screen. 5. Select Yes to reset the selected settings, then press OK. (Select No, then press OK if you want to cancel the operation.) Parent topic: Solving Problems Solving Setup Problems Check these sections if you have problems while setting up your product. Noise After Ink Installation Software Installation Problems Parent topic: Solving Problems Noise After Ink Installation If you hear noises from your product after installing ink, try these solutions: • The first time you install ink cartridges, the product must prime its print head. Wait until priming finishes before you turn off the product, or it may prime improperly and use excess ink the next time you turn it on. Your product is finished priming the print head when the power light stops flashing. • If the product's print head stops moving or making noise, and the charging process has not finished after 6 minutes, turn off your product. Turn it back on and check to see if charging is still in progress. If it is still in progress, contact Epson for help. Parent topic: Solving Setup Problems 264