Epson XP-15000 Users Guide - Page 161

LCD screen message Condition/solution Cannot change the setting because Paper Configuration is disabled. The Paper Configuration setting must be enabled to use AirPrint. The printer's borderless printing ink pad is nearing the end of its service life. Please contact Epson support. The ink pads are near the end of their service life and the message will be displayed until the ink pad is replaced. Contact Epson for support. (To resume printing, select OK.) The printer's borderless printing ink pad has reached the end of its service life. It is not a user-replaceable part. Please contact Epson support. The ink pad is at the end of its service life. Turn off the product and contact Epson for support. To use cloud services, update the root certificate from the Epson Web Config utility. Access your product's built-in Web Config utility and update the root certificate for your product. Paper remains inside Load letter- or A4-size paper in the rear paper feed and select Done. Load because it is placed the removed paper again in the portrait direction, in the center of the rear sideways. Load XX size paper feed. paper in the XX to remove the paper inside. The combination of the There is a problem with the network connection to your product. Check the IP address and the solutions in this guide. subnet mask is invalid. See your documentation for more details. Recovery mode An error has occurred during firmware updating. Connect your product using a USB cable and try updating the firmware again. If you still receive this error message, contact Epson for support. 161