Fantec MR-35DUS2 Datasheet - Page 5

Click "Disks Management" plan: Right pop-up The additional disks (H :) and the additional disks (I :)' menus, choose "Delete disk segmentation". Click "Segmentation additional disks", followed by a clew to operate 2.1.2 BIG MODE The two drives were connected to the products HDD1 and HDD2 Connector. USB&Power Cable were connected; Opening the power switch, pulling MODE switch to BIG and press RESET switch, after a few seconds, the computer will automatically capture USB devices. Click "My Computer", right-clicking pop-up menu, click Options "manage", popup computer management plan was pop-up as follow: 2.1.3 RAID0/FAST MODE The two drives were connected to the products HDD1 and HDD2 Connector. USB&Power Cable were connected; Opening the power switch, pulling MODE switch to RAID0 and press RESET switch, after a few seconds, the computer will automatically capture USB devices and increased 1 drive(If not drive there, then the hard disk drive management will re-zoning which format),At the moment you can Operate the disk. Re-zoning which drives formatted as follows(All information will be eliminated when Format hard drives). Click "My Computer", right-clicking pop-up menu, click Options "manage", popup computer management plan was pop-up as follow: Click "Disks Management" plan: Right pop-up the additional disks (H :)' menus, choose "Delete disk segmentation". Click "Segmentation additional disks", followed by a clew to operate. 7 Click "Disks Management" plan: Right pop-up the additional disks (H :)' menus, choose "Delete disk segmentation". Click "Segmentation additional disks", followed by a clew to operate. 8