Fisher and Paykel DD24DCTX7 BOOK INSTL DD24D Ph7 US CA EN (English) - Page 16

Refit The Drawer Onto The Runners, Optionally Secure To The Cabinetry Above, Secure To The Cabinetry

Get Fisher and Paykel DD24DCTX7 PDF manuals and user guides View all Fisher and Paykel DD24DCTX7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

12b SECURE TO THE CABINETRY ON THE SIDES For further adjustment, using the most appropriate length Hexagonal socket supplied, fully extend leveling feet up to required distance by hand. To access the side brackets, you might have to push aside the insulation. After securing, ensure the sound insulation is repositioned correctly. Hexagonal x4 socket Secure using two pairs of formed brackets (use 5⁄8" (16 mm) screws). Repeat on the other side of the chassis. Ensure product is level and aligning with cabinetry. 13b OPTIONALLY SECURE TO THE CABINETRY ABOVE 16 (x2) The top mounting brackets will only bend upwards a maximum of 3⁄8"(10 mm). 14b REFIT THE DRAWER ONTO THE RUNNERS Ensure the drawer Pounllbfootrhwsairddesth4e"(r1e0le0amsemt)abs is now rotated clockwise back. 146 135 Before refitting the drawer, ensure the hoses are not 159 twisted and the latches at the rear of each drawer runner are facing forward. 113 Ensure the release tabs on both sides are reset fully. 124

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
16
x4
14b
REFIT THE DRAWER ONTO THE RUNNERS
12b
To access the side brackets,
you might have to push aside
the insulation. After securing,
ensure the sound insulation is
repositioned correctly.
Secure using two pairs
of formed brackets
(use 5⁄¶” (1µ mm)
screws). Repeat on
the other side of the
chassis.
13b
OPTIONALLY SECURE TO THE CABINETRY ABOVE
(x2)
The top mounting
brackets will only bend
upwards a maximum of
µ⁄8”(10 mm).
SECURE TO THE CABINETRY ON THE SIDES
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
leveling feet up to required
distance by hand.
Ensure product is level and
aligning with cabinetry.
Hexagonal
socket
13
14
15
16
19
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
Ensure the release tabs on
both sides are reset fully.
Ensure the drawer
is now rotated
clockwise back.
Pull forward the release tabs
on both sides 4”(100
mm)
1
2
3
4
5