Fisher and Paykel DD24DCTX7 BOOK INSTL DD24D Ph7 US CA EN (English) - Page 8

7a STANDARD HEIGHT INTEGRATED MODELS ONLY - CUSTOM PANEL CALCULATIONS 8 The following calculations assume the top of the upper panel is aligned with the top of the adjacent cabinetry. The final panel/cabinetry alignment is achieved by adjusting the feet: WIDTH OF ALL PANELS Measure A (the width between adjacent door/drawer fronts) and write it in the first box below, then complete the equation. A clearance to adjacent cabinet front (min. 1⁄16" (2 mm)) WIDTH OF PANEL (min. 23 7⁄16" (596 mm)) - 2x = HEIGHT OF THE UPPER PANEL minimum height 15 11⁄16" (398 mm) B upper panel extension (0 "/mm recommended) HEIGHT OF UPPER PANEL + = Note: The 'upper panel extension' B allows for the top of the upper panel to extend above the chassis where required. HEIGHT OF THE LOWER PANEL Measure C (door/drawer height (or equivalent)) and write it in the first box below, then complete the equation. C height of (min 28 ¼" (717 mm) + B)) upper panel - ventilation gap (min. 5⁄16" (8 mm)) - HEIGHT OF LOWER PANEL (min. 12 ¼" (311 mm) = FRONT PANEL SPECIFICATIONS 5⁄8 - 13⁄16" (16-20 mm) panel thickness min. 1⁄16"(2mm) Adequately sealed to withstand moisture (122OF/ 50OC @ 80% RH) Maximum weight of each panel: 20 lb (9 kg) TOEKICK PANEL SPECIFICATIONS min. 3⁄8" (9 mm) panel thickness if using supplied screws Adequately sealed to withstand moisture (122OF/ 50OC @ 80% RH) You may choose to affix your custom toekick panel either by screwing it to the supplied mounting bracket or gluing it on the supplied prefinished toekick panel. A min. 1⁄16"(2mm) min. 1⁄16"(2mm) WIDTH OF ALL PANELS min. 1⁄16"(2mm) HEIGHT OF UPPER PANEL D C min. 5⁄16"(8mm) ventilation gap HEIGHT OF LOWER PANEL HEIGHT OF TOEKICK PANEL HEIGHT OF THE TOEKICK PANEL Measure D (height from the top of adjacent cabinet door fronts to the floor) and write it in the first box below, then complete the equation. D B upper panel extension (0"/ mm recommended) height from top of product to toekick panel mounting point clearance to floor HEIGHT OF TOEKICK PANEL (min. ½" (12 mm)) (min. 2 ¾" (70 mm)) - - 28 15⁄16" - = (735 mm) min. ½"(12mm) clearance to floor If the toekick recess (dimension J under 'Product dimensions') is between 2" and 3 5⁄16" (50 and 84 mm) deep, the toekick panel will need to be modified for fitting around the underside of the product. See illustration for details on the shape of the cutout required. 17" (432 mm) R ½" (12.7 mm) 2 3⁄16" (55 mm) Side J 1 3⁄16-2 " (30-50 mm) Side J 2-3 5⁄16" (50-84 mm)