Fisher and Paykel DD24DCTX7 BOOK INSTL DD24D Ph7 US CA EN (English) - Page 4

3a PARTS SUPPLIED - ALL MODELS 4 Drain hose support (1) Drain hose joiner (1) Wire clip (2) (for securing Drain hose joiner) Clamp (1) (for securing Drain hose joiner) Side mounting bracket kit (A and B) (2) OPTIONAL Top mounting brackets (2) OPTIONAL Phillips 5⁄8" (16 mm) screws (9) Rubber washer for inlet hose (1) (comes already fitted) Moisture protection tape (1) (to prevent moisture damage) Hexagonal socket for feet adjustment (2) (long & short) Prefinished toekick (1) Edge Protector (1) (If the services hole is through a metal partition the hole must be protected with the Edge protector supplied to prevent damage to the power cord or hoses.) 3b ADDITIONAL PARTS SUPPLIED WITH INTEGRATED MODELS If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11' 10" (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com Panel bracket (2) (attached to product) Panel mounting screws (12) Toekick mounting bracket (1) (A custom toekick panel of any material with thickness 3⁄8"-¾" (9 - 19 mm) can be screwed to the plastic toekick mounting bracket) Toekick mounting screws (5)