Fisher and Paykel DD24DCTX7 BOOK INSTL DD24D Ph7 US CA EN (English) - Page 18

INTEGRATED MODELS ONLY - INSTALLING THE FRONT PANELS 18 16 REMOVE BRACKETS FROM PRODUCT WARNING! Electrical Shock Hazard Before continuing, ensure that the product is disconnected from the power supply. Failure to follow this warning may result in electrical shock, injury or fire. 1 17 ATTACH PANELS TO PANEL BRACKETS 2 1 5⁄8" (1166mm)xx66 There must be at least 3 screws used each side Important! Break off and discard the tab at the top of the Lower Panel Bracket. 2 1 3 18 GROUND THE PANELS Repeat for the other drawer WARNING! Electrical Shock Hazard To ground (earth) the panel bracket, connect the ground (earth) wire from the product to one of the tabs. Any custom metal component (e.g. handle) that extends past the rubber seal must be grounded (earthed) too. Failure to follow these warnings may result in electrical shock, injury or fire. Align bottom of panels with bottom of brackets 19 ATTACH PANELS TO PRODUCT 2 3 Important! Ensure the rubber seal between the drawer and panels is kept in place. 1 2 Repeat for the other drawer When refitting the door pins, ensure they are orientated as shown.