Fisher and Paykel DE70FA1 Dryers DE70FA* & DG70FA* User Guide (English, Sp - Page 12
Location Requirements, Dimensions
View all Fisher and Paykel DE70FA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Location Requirements Bathroom or Bedroom Installation The Dryer MUST be vented to the outdoors. See EXHAUST information. Dimensions Exhaust Outlet Location Exhaust outlet 114mm (4 /") 298mm (11 /") Mobile or Manufactured Home Installation Installation must comply with the current CAN/CSA Z240 MH series Mobile Home Installation Codes or the Manufactured Home Construction & Safety Standard, title 24, part 32-80 or, when such standard is not applicable, with American National Standard for Mobile Home, AINSI/NFPA NO. 501B. The dryer MUST be vented to the outdoors with the termination securely fastened to the mobile home structure. (See EXHAUST information). The vent MUST NOT be terminated beneath a mobile or manufactured home. The vent duct material MUST BE METAL. The vent MUST NOT be connected to any other duct, vent, or chimney. Do not use sheet metal screws or other fastening devices which extend into the interior of the exhaust vent. In addition to the above, for gas dryers: Kit 14-D346-33 MUST be used to attach the dryer securely to the structure. Provide an opening with a free area of at least 161cm sq. (25 sq. in.) for introduction of outside air into the dryer room. 12