Fisher and Paykel DE70FA1 Dryers DE70FA* & DG70FA* User Guide (English, Sp - Page 17
Alternative Exhaust Directions
View all Fisher and Paykel DE70FA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Alternative Exhaust Directions US CA This dryer can be vented from the rear, right, left, and bottom side of the cabinet and must be exhausted to the outdoors. Note: The gas dryer can not be exhausted directly through the right side of the cabinet. Dryer Exhaust to Right , Left or Bottom of Cabinet Detach and remove the bottom, right or left side knockout as desired. Remove the screw inside the dryer exhaust duct and save. Pull the duct out of the dryer. Protect sharp edges around the knockout and exhaust opening with tape. Remove screw and save Cut the duct as shown and keep portion A. B Tab Location Through the rear opening, locate the tab in the middle of the dryer base. Lift the tab to about 45° using a flat blade screwdriver. Bend tab up 45° Remove desired knockout (one only) Fixing hole A 9" Adding New Duct Fixing Hole Reconnect the cut portion (A) of the duct to Portion "A" the blower housing. Making sure that the shortened duct is aligned with the tab in the base. Use the screw saved previously to secure the duct in place through the tab on the dryer base. Right or left side exhaust 17