Fisher and Paykel DE70FA1 Dryers DE70FA* & DG70FA* User Guide (English, Sp - Page 32

Reversing the Door

Get Fisher and Paykel DE70FA1 PDF manuals and user guides View all Fisher and Paykel DE70FA1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Reversing the Door Tools Need: ƒ Standard #2 Phillips screwdriver ƒ Tape-tipped putty knife ƒ Needle-nosed pliers 1 Open the door and remove the filler plugs opposite the hinges. 2 With the door completely open, remove the bottom screw from each hinge on the dryer face. 3 Insert these screws about half way into the top holes, for each hinge, on the opposite side (where you removed the filler plugs). Apply firm pressure to get the screw started in untapped holes. 4 Loosen the top screw from each hinge on the dryer face half way. 5 With one hand holding the top of the door and the other hand holding the bottom, remove the door from the dryer by lifting it up and out. 6 Rotate the door 180°. Insert it on the opposite side of the opening by moving the door in and down until the top hinge and the bottom hinge are resting on the two top screws inserted in step 3. 7 Remove the remaining screws from the side of the opening from which the door was removed. With these screws secure each hinge at the bottom. 8 Tighten the two top screws of each hinge. 9 Reinsert the plastic plugs on the side from which the door was removed. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
32
Reversing the Door
Tools Need:
Standard #2 Phillips screwdriver
±
Tape-tipped putty knife
±
Needle-nosed pliers
±
Open the door and remove the filler plugs opposite the hinges.
1
With the door completely open, remove the bottom screw
2
from each hinge on the dryer face.
Insert these screws about half way into the top holes, for
3
each hinge, on the opposite side (where you removed the
filler plugs).
Apply firm pressure to get the screw started in
untapped holes.
Loosen the top screw from each hinge on the dryer face half
4
way.
With one hand holding the top of the door and the other hand
5
holding the bottom, remove the door from the dryer by lifting
it up and out.
Rotate the door 180°.
Insert it on the opposite side of the
6
opening by moving the door in and down until the top hinge
and the bottom hinge are resting on the two top screws
inserted in step 3.
Remove the remaining screws from the side of the opening
7
from which the door was removed.
With these screws secure
each hinge at the bottom.
Tighten the two top screws of each hinge.
8
Reinsert the plastic plugs on the side from which the door was
9
removed.