Fisher and Paykel DE70FA1 Dryers DE70FA* & DG70FA* User Guide (English, Sp - Page 18
Caution
View all Fisher and Paykel DE70FA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Alternative Exhaust Directions Adding Elbow and Duct for Exhaust to Right or Left Side of Cabinet Preassemble 100mm (4") elbow with 100mm (4") duct. Wrap duct tape around joint. Insert duct assembly, elbow first, through the side opening and connect the elbow to the dryer internal duct. Exhaust can be added to left or right side CAUTION! Be sure not to pull or damage the electrical wires inside the dryer when inserting the duct. Duct tape Apply duct tape as shown on the joint between the dryer internal duct and the elbow. CAUTION! Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard. Duct tape Adding Elbow for Exhaust through Bottom of Cabinet Insert the elbow through the rear opening and connect it to the dryer internal duct. Apply duct tape on the joint between the dryer internal duct and elbow, as shown above. CAUTION! Internal duct joints must be secured with tape, otherwise they may separate and cause a safety hazard. Adding Cover Plate to Rear of Cabinet (Sides and Bottom Exhaust) Connect standard metal elbows and ducts to complete the exhaust system. Cover back opening with a plate (kit WE1M454) available from your local service provider. Place dryer in final location. Plate (kit WE1M454) 18