Fluke 1735 User Manual - Page 44
Save, Logging Function, Record/Measure - battery
View all Fluke 1735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
1735 Users Manual Save With Save/Enter you will get a screenshot and thus store the actual picture of the display in the memory location subsequently shown. Logging Function With Record/Measure you can start the logging function or you can get back into the measuring mode. Before the start, the maximum logging time is indicated and you can change this value with Esc followed by entering using the Cursor key. Changes in the averaging time, cause corresponding changes in the logging time of the measurement (double averaging time = double logging time). When the logger graphics reach the screen margin during recording, a picture of this screen is saved. The display is then deleted and the recording is continued. Up to 6 auto screens are saved in the course of a recording. The saved screenshots can be retrieved via the View Auto Screenshots menu. Note Do not forget to operate the Logger with the AC adapter during logging in order to prevent shutdown caused by low battery. 34