Foxconn M61PMX English Manual. - Page 88
In Windows, click Cancel to skip any Found New Hardware Wizard.
View all Foxconn M61PMX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
2. Select a RAID array for use (also can refer to section 5-3) After rebooting your computer, you will see the RAID software prompting you to press [F10]. Press [F10] to enter the NVIDIA MediaShield BIOS setup and configure the mirrored RAID array as described in the 5-3 section. Finally, you can reach this step as depicted. MediaShield BIOS Jul 27 2007 - Array List - Boot Status Vendor Yes Healthy NVIDIA Array Size MIRROR 232.88G [Ctrl-X] Exit [↑↓] Select [B] Set Bootable [N] New Array [ENTER] Detail 3. Press [Ctrl]+[X] keys to exit and go to Windows. 4. In Windows, click "Cancel" to skip any "Found New Hardware Wizard". Use driver CD and click on "NVIDIA MCP61 Chipset Driver" to install the NVIDIA RAID driver. The RAID driver will be installed only when you select "RAID" in "RAID Operation Mode" setting. If you do not select RAID, then RAID driver will not be installed. 5 81