Fujitsu 4530C Operator's Guide - Page 113
Double-feed Detection Conditions, Check overlapping, Check length, Check overlapping and length
View all Fujitsu 4530C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
6.5 Double-feed Detection Conditions Select one of the following: • Check overlapping • Check length • Check overlapping and length The following condition is required when any of the above options is selected: ■ Check overlapping Paper weight 52 g/m2 - 127 g/m2 Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document. Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the document. ■ Check length Document length deviation 1 % or less Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document. ■ Check overlapping and length Paper weight Document length deviation 52 g/m2 - 127 g/m2 1 % or less Punched holes are not allowed within 35 mm (1.4 in.) of the vertical centerline of the document. Other paper shall not be glued within 35 mm (1.4 in.) of the vertical centerline of the document. 108