Fujitsu 5530C2 Operator's Guide - Page 84
To Specify the Area for Multifeed Detection - fi parts
UPC - 097564307201
View all Fujitsu 5530C2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
■ To Specify the Area for Multifeed Detection Normally, the multifeed detection function monitors paper overlaps at the central part of sheets (width: 35mm). Therefore, some types of documents, such as the resume and postcard, on which a photograph or stamp is pasted, may be accidently recognized as multifed documents. When scanning these types of documents, you can prevent multifeed errors by narrowing down the area to be detected. Enable this function, following the procedure below. 1. Open the Scanner's Properties dialog box. 1) Turn on your scanner, and then check that the scanner is connected to a personal computer. For information about how to connect the scanner to your personal computer, refer to "2.2 Connecting the Scanner to a PC" in fi-5530C2 Getting Started on the CDROM . 2) Double-click on the [Printer and Other Hardware] icon in Control Panel. ⇒ The [Printer and Other Hardware] window appears. 3) In the [Printers and Other Hardware] window, double-click on the [Scanners and Cameras] icon. ⇒ The [Scanners and Cameras] window is displayed. 68