Fujitsu MBA3147RC Product Manual - Page 25
Hardware Specifications, time is the time for disks to completely stop from power off or stop command.
![]() |
UPC - 102646074718
View all Fujitsu MBA3147RC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2.1 Hardware Specifications (*1) The formatted capacity can be changed by changing the logical block length and using spare sector space. See Chapter 3 for the further information. The formatted capacity listed in the table is an estimate for 512 bytes per sector. (*2) One gigabyte (GB) = one billion bytes; accessible capacity will be less and actual capacity depends on the operating environment and formatting. (*3) The seek time is as follows: (*4) The start time is the time from power on or start command to when the HDDs are ready, and the stop time is the time for disks to completely stop from power off or stop command. (*5) This value indicates in idle mode. Power supply at nominal voltage ±1%. 25°C ambient. (*6) The maximum data transfer rate may be restricted to the response speed of initiator and by transmission characteristics. 1 MB/s = 1,000,000 bytes/s. (*7) Refer to 1.1 (13). C141-E252 21
![](/manual_guide/products/fujitsu-mba3147rc-product-manual-93fa144/25.png)