Fujitsu MHN2100AT Manual/User Guide - Page 115
Bits 15-14: Reserved, 00' = Reserved
View all Fujitsu MHN2100AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
5.3 Host Commands *17 WORD 93 Bits 15-14: Reserved Bit 13: '1' = CBLID- is a level higher than VIH. '0' = CBLID- is a level lower than VIL. Bits 12-8: In the case of Device 1 (slave drive), a valid value is set. Bit 12: Reserved Bit 11: '1' = Device asserts PDIAG-. Bit 10, 9: Method for deciding the device No. of Device 1. '00' = Reserved '01' = Using a jumper. '10' = Using the CSEL signal. '11' = Other method. Bit 8: Reserved Bits 7-0: In the case of Device 0 (master drive), a valid value is set. Bit 7: Reserved Bit 6: '1' = Device 1 is selected, Device 0 responds. Bit 5: '1' = Device 0, assertion of DASP- was detected. Bit 4: '1' = Device 0, assertion of PDIAG- was detected. Bit 3: '1' = Device 0, an error was not detected in the selfdiagnosis. Bit 2, 1: Method for deciding the device No. of Device 0. '00' = Reserved '01' = Using a jumper. '10' = Using the CSEL signal. '11' = Other method. Bit 0: Reserved *18 WORD 128 Bit 15-9: Reserved Bit 8: Security level. 0: High, 1: Maximum Bit 7-6: Reserved Bit 5: '1' = Enhanced security erase supported C141-E120-02EN 5-39