Fujitsu MHN2100AT Manual/User Guide - Page 172
Other commands, 5.4.5 DMA data transfer commands, WRITE MULTIPLE
View all Fujitsu MHN2100AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
Interface 5.4.4 Other commands • READ MULTIPLE • SLEEP • WRITE MULTIPLE See the description of each command. 5.4.5 DMA data transfer commands • READ DMA • WRITE DMA Starting the DMA transfer command is the same as the READ SECTOR(S) or WRITE SECTOR(S) command except the point that the host initializes the DMA channel preceding the command issuance. Interruption processing for DMA transfer does not issue interruptions in any intermediate sector when a multisector command is executed. The following outlines the protocol: 5-96 C141-E120-02EN
Interface
5-96
C141-E120-02EN
5.4.4
Other commands
•
READ MULTIPLE
•
SLEEP
•
WRITE MULTIPLE
See the description of each command.
5.4.5
DMA data transfer commands
•
READ DMA
•
WRITE DMA
Starting the DMA transfer command is the same as the READ SECTOR(S) or
WRITE SECTOR(S) command except the point that the host initializes the DMA
channel preceding the command issuance.
Interruption processing for DMA transfer does not issue interruptions in any
intermediate sector when a multisector command is executed.
The following outlines the protocol: