Garmin FR60 Owner's Manual - Page 43
Troubleshooting, Problem, Solution/Answer - 31
UPC - 753759084813
View all Garmin FR60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Appendix Troubleshooting Problem Solution/Answer The buttons do not respond. How do I restart the FR60? Press and hold MODE and ENTER simultaneously to restart the FR60 software. You must reset the time and your custom settings. If you are still having problems, remove and then replace the battery (see page 31). How do I clear all user data? This procedure deletes all information that you have entered. Press and hold MODE, LIGHT/ , and UP simultaneously. This also restores the factory settings. Workout data is deleted. How do I set the time to AM or PM? Verify that the time mode is set to 12 (12 hour). Press UP and DOWN to select the correct hour. The A or P icon appears below the seconds on the time page. For more information, see page 11. The FR60 will not send data to my computer. See page 24 to enable computer pairing. The heart rate • monitor or foot pod will not pair with the • FR60. • Stay 10 m away from other ANT sensors while pairing. Bring the FR60 within range (3 m) of the heart rate monitor while pairing. If the problem persists, replace the battery. How do I change the time? See page 11 to set the time. FR60 Owner's Manual 37