Garmin GPS 72H Owner's Manual - Page 43
Receiving Marine Data, Installing the Device into the, Mounting Bracket
View all Garmin GPS 72H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing the Device into the Mounting Bracket 1. Locate the groove on each side of the device case. 2. Align the grooves on the device with the corresponding tabs on the device cradle and slide the device downward into the bracket. 3. Secure the device in the cradle by sliding the locking mount handle to the left. Groove Locking handle Marine Navigation Receiving Marine Data To receive VMG data, you must be connected to a NMEA 0183compatible water-speed sensor. To receive water temperature data, you must be connected to a NMEA 0183compatible temperature sensor. NOTE: To receive water speed and temperature information, connect a water-speed and water-temperature sensor to the device. GPS 72H Owner's Manual 37
GPS 72H Owner’s Manual
³7
Marine Navigation
Installing the Device into the
Mounting Bracket
1. Locate the groove on each side of
the device case.
2. Align the grooves on the device
with the corresponding tabs on
the device cradle and slide the
device downward into the bracket.
3. Secure the device in the cradle by
sliding the locking mount handle
to the left.
Groove
Lock±ng
handle
Receiving Marine Data
To receive VMG data, you must
be connected to a NMEA 0183-
compatible water-speed sensor. To
receive water temperature data, you
must be connected to a NMEA 0183-
compatible temperature sensor.
NOTE
: To receive water speed and
temperature information, connect a
water-speed and water-temperature
sensor to the device.