GE 27958GE1 User Guide - Page 12
Set Contrast, Ring To Answer, Security Code - a phone
UPC - 044319202373
View all GE 27958GE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1. Press the FLASH/PROGRAM button until SET CONTRAST shows in the display. "1" is the default setting. 2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use the MESSAGES/CID ( or ) button on the base to scroll to your selection. 3. Press FLASH/PROGRAM again to store your selection. NOTE: You can press FLASH/PROGRAM at any time to go to the next option. RINGS TO ANSWER NOTE: This setting may only be made with the base. You may set the number of times you want the phone to ring before the answering system answers a call. 1. Press the FLASH/PROGRAM button until RING TO ANSWER shows in the display. "5" is the default setting. 2. Press 3 or 5 or use the MESSAGES/CID ( or ) button to scroll to 3, 5 or TOLL. NOTE: TOLL (Toll Saver) can save you the cost of a toll call when accessing your messages from another phone. If you have new messages, the unit answers after the 3rd ring. If you have no new messages, the unit answers after the 5th ring. You can hang up after the 3rd or 4th ring and save the pay telephone or long distance charge. 3. Press FLASH/PROGRAM again to store your selection. You will hear a confirmation tone. SECURITY CODE NOTE: This setting may only be made with the base. You can access the answering system from any tone dialing telephone in another location. The security code is required for remote access, and it prevents unauthorized access to your answering system. You may only change the security code at the base. 1. Press the FLASH/PROGRAM button until SECURITY CODE shows in the display. 12