GE 27958GE1 User Guide - Page 32
Answering System Set Up Answering System Operation
UPC - 044319202373
View all GE 27958GE1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
CALL WAITING CALLER ID Provided you subscribe to Caller ID with Call Waiting service from your phone company, you may see who is calling when you hear the call waiting tone in the receiver. The CID information appears in the display after you hear the tone. Press FLASH/PROGRAM to put the current call on hold and answer the incoming call. Press FLASH/PROGRAM again when you want to return to the first call. IMPORTANT: In order to use all of the features of this unit, you must subscribe to either the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID Service. ANSWERING SYSTEM SET UP This section shows you how to set up your answering system to receive incoming calls. Before you begin the setup, you must turn on the answering system. • Press the ANSWERER ON/OFF button to turn the answering system on and off. The new messages indicator flashes when you have new messages. NOTE: The display shows "ANSWER OFF " when the answering system is off. The default status is on. VOICE INSTRUCTIONS If you need additional assistance, press the MEMO button on the base and follow the voice instructions. ANSWERING SYSTEM OPERATION RECORDING THE OUTGOING ANNOUNCEMENT For best results when recording, you should be about nine inches from the microphone, and eliminate as much background noise as possible. 1. Make sure the answering system is ON. 32