Gigabyte GA-6JIEV2-RH Manual - Page 33

ECP Mode Use DMA

Get Gigabyte GA-6JIEV2-RH PDF manuals and user guides View all Gigabyte GA-6JIEV2-RH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

GA-6JIEV2-RH Motherboard Disabled Disable USB 2.0 controller. Legacy USB storage detect This option allows users to decide whether to detect USB storage devices, including USB flash drives and USB hard drives during POST. Enabled BIOS will scan all USB storage devices. (Default setting) Disabled Disable this function. Onboard Lan Controller All of Enabled Enable all onboard LAN devices. (Default setting) Only Used LAN1 Enable onboard LAN1 device. Only Used LAN2 Enable onboard LAN2 device. All of Disabled Disable both onboard LAN devices. Onboard Lan Boot ROM Enabled Onboard Lan Boot ROM. Disabled Disable this function. (Default setting) Onboard Parallel Port This feature allows you to select from a given set of parameters if the parallel port uses the onboard I/O controller. Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default setting) 278/IRQ5 3BC/IRQ7 Enable onboard LPT port and address is 278/IRQ5. Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode This feature allows you to connect with an advanced printer via the port mode it supports. SPP Using Parallel port as Standard Parallel Port. (Default setting) EPP Using Parallel port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP Mode Use DMA This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected. This function will available when "Parallel Port Mode" set at ECP or ECP+EPP. 3 Set ECP Mode Use DMA to 3. (Default setting) 1 Set ECP Mode Use DMA to 1. Onboard Serial Port 1 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default setting) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 2E8/IRQ3 Disabled Enable onboard Serial port 1 and address is 3E8/IRQ4. Enable onboard Serial port 1 and address is 2E8/IRQ3. Disable onboard Serial port 1. Onboard Serial Port 2 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3. (Default setting) 3E8/IRQ4 2E8/IRQ3 Enable onboard Serial port 1 and address is 3E8/IRQ4. Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
GA-6JIEV2-RH Motherboard
33
Disabled
Disable USB 2.0 controller.
Legacy USB storage detect
This option allows users to decide whether to detect USB storage devices, including USB flash
drives and USB hard drives during POST.
Enabled
BIOS will scan all USB storage devices. (Default setting)
Disabled
Disable this function.
Onboard Lan Controller
All of Enabled
Enable all onboard LAN devices. (Default setting)
Only Used LAN1
Enable onboard LAN1 device.
Only Used LAN2
Enable onboard LAN2 device.
All of Disabled
Disable both onboard LAN devices.
Onboard Lan Boot ROM
Enabled
Onboard Lan Boot ROM.
Disabled
Disable this function. (Default setting)
Onboard Parallel Port
This feature allows you to select from a given set of parameters if the parallel port uses the onboard
I/O controller.
Disable onboard LPT port.
378/IRQ7
Enable onboard LPT port and address is 378/IRQ7. (Default setting)
278/IRQ5
Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
This feature allows you to connect with an advanced printer via the port mode it supports.
SPP
Using Parallel port as Standard Parallel Port. (Default setting)
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
ECP Mode Use DMA
This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected.
This function will available when "Parallel Port Mode" set at ECP or ECP+EPP.
3
Set ECP Mode Use DMA to 3. (Default setting)
1
Set ECP Mode Use DMA to 1.
Onboard Serial Port 1
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default setting)
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled
Disable onboard Serial port 1.
Onboard Serial Port 2
3F8/IRQ4
Enable onboard Serial port 1 and address is 3F8/IRQ4.
2F8/IRQ3
Enable onboard Serial port 1 and address is 2F8/IRQ3. (Default setting)
3E8/IRQ4
Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled
Disable onboard Serial port 1.