Gigabyte GA-7VTXH User Manual - Page 86

GA-7VTXE/GA-7VTXH Motherboard STEP 6: Load BIOS defaults. Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the BIOS defaults after BIOS has been upgraded. This important step resets everything after the flash. (1) Take out the floppy diskette from floppy drive, and then restart the system. The boot up screen will indicate your motherboard model and current BIOS version. American Release:08/04/2001 Megatrends AMIBIOS (C) 1999 American Megatrend 8ITXR F3 Check System Health OK, Vcore = 1.750V CPUID : 0F0A Patch ID : 0009 Intel(R) Pentium(R) 4 Processor-1.50 GHz RamBus/Host Frequency is 300/100MHz Checking NVRAM 262144KB Wait... DEL: Setup F8: Boot Menu F12: Network boot Press any key to contiune ( C ) American Megatrends Inc., 63-0001-001199-00101111-071595-TEHAMA-GA8ITXR0-H (2) Don't forget to press key to enter BIOS setup again when system is boot up. Use the arrows to highlight the item "LOAD OPTIMIZED DEFAULTS" then press "Enter". System will ask "Load OPTIMIZED Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm. AMIBIOS SIMPLE SETUP UTILITY - VERSION 2.00 (C) 2001 American Megatrends, Inc. All Rights Reserved STANDARD CMOS SETUP INTEGRATED PERIPHERALS BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP CHIPSET FEATURES SETUP SUPERVISOR PASSWORD POWER MANAGEMENT SETUP USER PASSWORD PNP / PCI CONFIGURATIONLoad Optimized DefaIDulEtsH?D(DY/ANU)?TON DETECTION LOAD FAIL-SAFE DEFAULTS SAVE & EXIT SETUP LOAD OPTIMIZED DEFAULTS EXIT WITHOUT SAVING ESC: Quit : Select Item (Shift)F3 : Select Language F5: Old Values F6: Fail-Safe Values F7: Optimized Values F8: Flash Utility F10:Save & Exit Current Language: English Load Optimized Defaults 86