Gigabyte GA-8AENXP Dual Graphic Manual - Page 10
English - ga
View all Gigabyte GA-8AENXP Dual Graphic manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English 1-2 Feature Summary CPU Chipset Memory Slots IDE Connections FDD Connections Onboard SATA Peripherals Onboard LAN Supports the latest Intel® Pentium® 4 LGA775 CPU Supports 1066/800/533MHz FSB L2 cache varies with CPU Northbridge: Intel® 925XE Express Chipset Southbridge: Intel® ICH6R 4 DDR II DIMM memory slots (supports up to 4GB memory) (Note 1) Supports dual channel DDR II 711/600(Note 2)/533/400 unbrffered DIMM Supports 1.8V DDR II DIMM 2 PCI Express x 16 slots 1 PCI Express x 1 slot 3 PCI slots 1 port from ICH6R (IDE1) (UDMA 33/ATA 66/ATA 100), allows connection of 2 IDE devices 1 port from PDC20779 (IDE2)(UDMA 33/ATA 66/ATA 100/ATA 133), allows connection of 2 IDE devices 1 FDD connection, allows connection of 2 FDD devices 4 Serial ATA ports from ICH6R controller (SATA0_SB, SATA1_SB, SATA2_SB, SATA3_SB) 2 Serial ATA II ports from PDC20779 controller (SATA0_PR, SATA1_PR) 1 parallel port supporting Normal/EPP/ECP mode 1 serial port (COMA) 8 USB 2.0/1.1 ports (rear x 4, front x 4 via cable) 3 IEEE1394b ports (requires cable) 1 front audio connector 1 PS/2 keyboard port 1 PS/2 mouse port 2 onboard Marvell 8001 chips (10/100/1000 Mbit) (LAN1 / LAN2) 2 RJ 45 ports (Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount. For example, 4 GB of memory size will instead be shown as 3.xxGB memory during system startup. (Note 2) To use a DDRII 711 memory module on the motherboard, you must install a 1066MHz FSB processor and overclock in BIOS. To use a DDRII 600 memory module on the motherboard, you must install an 800MHz FSB processor and overclock in BIOS. GA-8AENXP Dual Graphic Motherboard - 10 -