Gigabyte GA-8AENXP Dual Graphic Manual - Page 25
SATA0_SB/SATA1_SB/SATA2_SB/SATA3_SB Serial ATA Connector, Controlled by ICH6R, SATA0_PR / SATA1_PR
View all Gigabyte GA-8AENXP Dual Graphic manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
English 10) SATA0_SB/SATA1_SB/SATA2_SB/SATA3_SB (Serial ATA Connector, Controlled by ICH6R) Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly. Pin No. Definition 1 GND 1 7 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 11) SATA0_PR / SATA1_PR (Serial ATA II Connector, Controlled by PDC20779) Serial ATA II can provide 300MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA II and install the proper driver in order to work properly. Pin No. Definition 1 GND 2 TXP 1 7 3 TXN 4 GND 5 RXN 6 RXP 7 GND - 25 - Hardware Installation
Hardware Installation
- 25 -
English
10)
SATA0_SB/SATA1_SB/SATA2_SB/SATA3_SB (Serial ATA Connector, Controlled by ICH6R)
Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and
install the proper driver in order to work properly.
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
1
7
11)
SATA0_PR / SATA1_PR (Serial ATA II Connector, Controlled by PDC20779)
Serial ATA II can provide 300MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA II and
install the proper driver in order to work properly.
7
1
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND