Haier GDE750AW User Manual - Page 23

English LOAD CLOTHES INTO DRYER • The appropriate load should be 1/3 ~ 1/2 of the drum volume. Do not overload, as space is needed to allow clothes free rotation for uniform and wrinkle-proof drying. • When drying big articles, only 2-3 pieces should be loaded at a time and supplemented with small and medium-sized articles. • For delicate clothes or less load, two towels may be added to get better drying and wrinkle-proof effects. • Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electro-static charge accumulation, and/or more lint. Rack Dry cycle • This program is designed specially for articles like sport shoes. During drying, please make sure the articles are placed on the rack with no risk of entangling the baffles while the drum is rotating. Note: If drying rack is not in place, rolling inner tumbler could collide with drying rack and causes damage to the dryer and drying rack. AUTO DRY CYCLE GDE/GDG 950AW 1. Press any button except "Off" button to power on. • The dryer will beep once and will change from off status to the initial operating status (Heavy Duty). • If the "Start/Pause" button is not pressed in 5 min after powering on, it automatically returns to off status. • The dryer returns to off status immediately upon end of each cycle. Pressing OFF will stop all operations. • The default status is "Heavy Duty" with the following options. Heavy Duty Normal Whites Bulky Press Free Delicate Touch Up Custom Dry Timed Dry Cool Down Cycle Completed Rack Dry Wrinkle Saver Remaining Time Extended Tumble Auto Dry Cycles Timed Dry Cycles Less Time More Time Wrinkle Saver Very More Normal Less Damp High Medium Low No Heat Louder Softer Off Sensor Dry Level Temp Signal Start Pause Off Note: Your dryer is equipped with an electronic moisture sensor which continuously senses the moisture in the dryer load during the drying cycle. The dryer will stop when the moisture in the clothes has reached your selected dry level. This helps to avoids clothes from over drying and prevents damage to clothes. The control panel will display "SEN" during the final sensing period and once the estimated dry time is determined it will be displayed. 22