Haier GDE750AW User Manual - Page 28
Rack Dry Cycle
View all Haier GDE750AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
English RACK DRY CYCLE GDG 750 More No rmal Less Dry Level Cycle Select Off High Medium Low No Heat Timed D ry Rack D ry 90 Heavy Duty 60 30 Normal 20 10 Temp Touch Up Whites Delicates Timed Dry Auto Dry Timed D ry Louder Softer Off Signal Clean Lint Drying Cool Down W rinkle Saver Cycle Process GDE/GDG 750AW 1. Turn the knob to any program except "OFF" to power on. The control panel will beep once and the dryer will change from "OFF" to the operating status. If Start/Pause button is not pressed five minutes after powering on, the dryer will automatically return to OFF status. 2. Set the cycle select dial to Rack Dry Cycle. 3. Press "Timed Dry" button to set the required drying time. 4-6. Press "Temp" and "Signal" to define the required programs. Note: For "Rack Dry" program use of "Temp" and "Signal" buttons is the same as for auto-programs. "Dry Level" is inactive. Other Features Your dryer also has the following features for your convenience: Lint Filter: • All dryers come with a lint filter that needs to be cleaned before or after every use (read "Care and Cleaning Guide" Section). Leveling Legs: • Your dryer has four leveling legs which are located in the front and rear corners of your dryer. After installing your dryer in its final position, you can level your dryer. • Leveling legs can be adjusted by turning them clockwise to raise your dryer or by turning them counterclockwise to lower your dryer. 27