Haier HW50-1010 User Manual - Page 14

User Instructions Using your washing machine 6. Start washing 6 When the washing machine is connected to the power socket and a program is selected, lightly touch this button to start operation. Du- ring a wash cycle, touch it lightly ,operation will stop and the indicator light start blinking. Touch it again to resume operation. To cancel a wash program during a wash cycle, touch this button, when the indicator light start blinking, press the Power switch, the program will 7 be cancelled. 。 30C 90。C 。 40C 。 60C 。 40C 7. Finish washing When the washing programme has finished the washing machine will power off 'slowly' for 1-3 minutes and the door will unlocked while the washing machine cools down. Changing a selected programme If you need to change a programme that has already been selected do the following: a: Turn the power off (press at the power button). b: Turn the power back on. c: Set the programme selection dial to the new programme as required. 13