Haier HW50-1010 User Manual - Page 6

Installation Levelling your washing machine Before use you MUST ensure the washing machine is level, check with a spirit level (5). This will minimise vibrations and noise during use plus reduce wear and tear. Level by adjusting the feet under the appliance. First adjust the feet by hand to get the 6 appliance level then tighten the nuts up to the underside of the appliance body using a 16mm spanner (6). Water inlet hose connection Important: This washing machine MUST only be connected to a cold water supply. Connect the water inlet hose, the angled connection attaches to the water inlet on the back of the washing machine (7). The straight connection attaches to the water supply valve (8). Ensure all seals are in place before connecting. Important: Only tighten the hose connection nut by hand - do not overtighten. Drain hose connection Important: The height of the top of the curve in the drain hose MUST be between 80 - 100cm from the floor (9). Fit the drain hose into the hose clip (10 ) and 10 attach to the wall etc. at the correct height. 5 30。C 90。C 40。C 60。C 40。C HW50-1010 7 Water inlet hose 8 Water inlet hose Water supply valve 9 HW50-1010W 。 30C 90。C 40。C 60。C 40。C Max. 100cm Min. 80cm 5