Haier HW50-1010 User Manual - Page 17

Transporting the washing machine

Get Haier HW50-1010 PDF manuals and user guides View all Haier HW50-1010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Care and Maintenance Transporting the washing machine If the washing machine is to be transported, the packing bolts and rubber spacers should be 4 5 replaced to pr event damage. a: Remove the back cover plate, by removing the 3 screws shown and sliding down the back cover plate (4 & 5). b: Remove the plastic plugs fr om the 3 packing bolt holes (insert - 6). c: Position all 3 rubber spacers inside the back of the washing machine (6). d: Line up the holes and insert all 3 packing bolts and tighten using a 13mm spanner or large 6 flatblade screwdriver (6). e: Replace the back cover plate and refit the screws. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
16
Care and Maintenance
Transporting the washing machine
If the washing machine is to be transported, the
packing bolts and rubber spacers should be
replaced to prevent damage.
a: Remove the back cover plate, by removing
the 3 screws shown and sliding down the back
cover plate (4 & 5).
b: Remove the plastic plugs from the 3 packing
bolt holes (insert - 6).
c: Position all 3 rubber spacers inside the back
of the washing machine (6).
d: Line up the holes and insert all 3 packing
bolts and tighten using a 13mm spanner or large
flatblade screwdriver (6).
e: Replace the back cover plate and refit the
screws.
6
4
5