Haier QAS740RMSS Use and Care Manual - Page 8
Using The Range
![]() |
View all Haier QAS740RMSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
ENGLISH USING THE RANGE SURFACE UNITS WARNING FIRE HAZARD: Never leave the range unattended with the cooktop ON above a Lo setting. Keep flammable items away from the cooktop. Turn off all controls when done cooking. Failure to follow these instructions can result in fire, serious injury or death. Throughout this manual, features and appearance may vary from your model. How to Set Push the knob in and turn in either direction to the setting you want. A surface ON indicator light will glow when any surface unit is on. For glass cooktop surfaces: A HOT COOKTOP indicator light will: • come on when the unit is hot to the touch. • stay on even after the unit is turned off. • stay on until the unit is cooled to approximately 150°F. Cookware for Coil Cooktops The following information will help you choose cookware which will give good performance on coil cooktops. NOTE: Follow all cookware manufacturer's recommendations when using any type of cookware on the coil cooktop. Recommended Stainless Steel Thin unclad stainless steel will give poor performance. Aluminum Heavy weight recommended. Good conductivity. Because of its low melting point, thin weight aluminum should not be used. Copper Bottom Enamel (painted) on Cast Iron Cast Iron Avoid/Not Recommended Enamel (painted) on Steel Glass-ceramic Poor performance. Stoneware Poor performance. At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is maintaining your desired setting. Be sure you turn the control knob to OFF when you finish cooking. Coil Cooktops Each coil surface unit uses "SENSI-TEMP TECHNOLOGY" to reduce the risk of cooktop oil and grease fires. This feature is located in the center of each surface unit. Power to the surface unit is temporarily interrupted when a pot or pan exceeds expected cooking temperatures. Even after the surface units are turned off, the surface unit retains enough heat to continue cooking. To avoid overcooking, remove pans from the surface units when the food is cooked. Avoid placing anything on the surface unit until it has cooled completely. 8 49-88074 Rev. 2
![](/manual_guide/products/haier-qas740rmss-use-care-manual-882517d/8.png)