Hamilton Beach 70735 Use and Care Manual - Page 5
How to Assemble, Spiral Slicer, How to Use Spiral, Blade and Ribbon Blade
View all Hamilton Beach 70735 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
How to Assemble Spiral Slicer w WARNING Cut Hazard. • Blades are sharp; handle carefully. • Inspect parts before use. Do not use if parts are cracked, bent, or damaged. • Do not place fingers or utensils into the blade while in use. 1. Align Bowl and Base. Turn Bowl clockwise to lock into place. 2. With the tabs on the Spiral Slicing Plate aligned to the tabs on inside of Bowl, insert Spiral Slicing Plate into the Bowl facing handle. Refer to graphic on the Spiral Slicing Plate. Ensure the small hole on the Spiral Slicing Plate aligns with the Motor Shaft. 3. Place end of Spiral Blade or Ribbon Blade into Spiral Slicing Plate, as shown at right. 4. Replace Lid. 5. Slide Food Pusher into Food Chute. How to Use Spiral Blade and Ribbon Blade 1. Plug into outlet. 2. Place the food in center of the Food Chute. Process only one piece of food at a time. 3. Press Food Pusher securely into food by pushing down on the Food Pusher. 4. Turn Control Knob to 1. 5. Apply light, constant pressure to Food Pusher while processing food. Allow the Food Pusher and motor to work at their own pace. 6. Keep processing until food stops being cut. About 1 inch (2.5 cm) of food will always remain unprocessed. 7. Remove the small cone-shaped piece of food left on the Food Pusher. Use as a snack or add to stock, soup, or salads. 8. Check Spiral Blade before spiralizing more food. If pulp is caught in Blade, clean with a brush and rinse. 9. When finished, switch to OFF ( ). Unplug. NOTES: • Pressing harder will not speed up the process or make the Spiral Slicer cut better. The Spiral Blade turns, not the food. • Do not lift up the Food Pusher during processing. This can cause the Food Pusher to lose its grip on the food. 5