Harman Kardon DPR 1001 Owners Manual - Page 7
Front Panel Information Display - receiver
View all Harman Kardon DPR 1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
FRONT PANEL INFORMATION DISPLAY F E A B CD A Bitstream Indicators B Lower Display Line C Multiroom Indicator D OSD Indicator NOTE: To make it easier to follow the installation instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section at www.harmankardon.com. E Speaker/Channel Input Indicators F Upper Display Line A Bitstream Indicators: When a digital input is playing, one of these indicators will light to display the type of data signal in use. B Lower Display Line: Depending on the receiver's status, a variety of messages will appear here. In normal operation, the current surround mode name will appear on this line. C Multiroom Indicator: This indicator lights when the multiroom system is active. Note that it will remain lit when the multiroom system is in use even when the main room system is in the Standby mode and all other indicators are dark. (See page 31 for more information on the Multiroom system.) D OSD Indicator: When the OSD system is in use, this indicator lights to remind you that the other indicators in this display do not function when the On-Screen Display is being used. E Speaker/Channel Input Indicators: These indicators are multipurpose, indicating either the speaker type selected for each channel or the number of channels available from the input source. The left, center, right, surround and surround back speaker indicators are composed of overlapping ovals, while the subwoofer is represented by a single box labeled "LFE". The center oval lights when a "Small" speaker is selected, and the outer oval lights when "Large" speakers are selected. When none of the indicators are lit for a specific channel, no speaker has been selected at that position. (See page 19 for more information on configuring speakers.) The indicators are positioned to correspond to the input channels. For standard analog inputs, only the top left and right indicators will light, indicating a stereo input. When a digital source is playing, the indicators will light to display the channels being received at the digital input. When the indicators flash, the digital input has been interrupted. F Upper Display Line: Depending on the receiver's status, a variety of messages will appear here. In normal operation, the current input source information will appear on this line, including the input name and an indication as to analog audio or one of the optical or coax digital audio inputs. FRONT PANEL INFORMATION DISPLAY 7