Hayward AquaRite w/TurboCell for Pools up to 25 000 Gallons AquaRite-Electroni - Page 12

Page 12 highlights

Installation Installation must be performed in accordance with Local and NEC codes. FILTER TIMER AQUA RITE 120/240 VAC LINE LOAD POWER BOOST AUTO BOOOFSFT AUTO OFF G LDLINE CONTROLS INC. SOLAR SYSTEM FILTER PUMP FROM FROM POOL SPA HEATER FLOW SWITCH ELECTROLYTIC CELL IN-FLOOR CLEANER TO POOL TO SPA Preparing Pool/Spa Water Refer to page 3 for recommended chemical levels. The pool's chemistry must be balanced BEFORE activating the AquaRite. NOTE: If the pool does not have new water, add 1 quart (1 liter) of metal remover and 1 quart (1 liter) of non-copper based algaecide to the pool, per manufacturer's instructions. This ensures a quick, troublefree transfer to the AquaRite system. Mounting the AquaRite Control The AquaRite is contained in a raintight enclosure that is suitable for outdoor mounting. The control must be mounted a minimum of 5 ft. (2 meters) horizontal distance (or more, if local codes require) from the pool/spa. The control is designed to mount vertically on a flat surface with the knockouts facing downward. Because the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not to block the four sides of the control. Do not mount AquaRite inside a panel or tight enclosed area. 11 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Installation
Installation must be performed in accordance with Local and NEC codes.
Preparing Pool/Spa Water
Refer to page 3 for recommended chemical levels.
The pool's chemistry must be balanced BEFORE
activating the AquaRite.
NOTE:
If the pool does not have new water, add 1 quart (1 liter) of metal
remover and 1 quart (1 liter) of non-copper based algaecide to the pool, per manufacturer's instruc-
tions.
This ensures a quick, troublefree transfer to the AquaRite system.
Mounting the AquaRite Control
The AquaRite is contained in a raintight enclosure that is suitable for outdoor mounting.
The control
must be mounted a minimum of 5 ft. (2 meters) horizontal distance (or more, if local codes require)
from the pool/spa.
The control is designed to mount vertically on a flat surface with the knockouts facing downward.
Because the enclosure also acts as a heat sink (disperses heat from inside the box), it is important not
to block the four sides of the control.
Do not mount AquaRite inside a panel or tight enclosed area.
FLOW
SWITCH
LINE
LOAD
IN-FLOOR
CLEANER
ELECTROLYTIC
CELL
HEATER
SOLAR
SYSTEM
FROM
POOL
120/240 VAC
POWER
TO
POOL
FROM
SPA
TO
SPA
FILTER
PUMP
FILTER
TIMER
11
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS