Hayward PL-PLUS Operation Manual - Page 16

SetFiDltaery aTn2d-aTlilme W8e:d3n0eAsdtaoy 41:00:03P7P or Filter T2-wkend 8:30A to 4:00P Filter T2-wkday 8:30A to 4:00P Adjust time setting Move between start and stop times & to previous/next menu item Adjust time setting Move between start and stop times & to previous/next menu item Adjust time setting Move between start and stop times & to previous/next menu item For one speed pumps, this is the second filter timeclock. For two speed or variable speed pumps, this timeclock will set the normal time period for filter pump low speed operation (the word "Filter T2" in the display will be replaced with "Filter Lo"). If the filter pump is off for more than 30 seconds, the pump will first turn on at high speed for 3 minutes to prime and establish water flow. Afterwards, it will drop down to low speed for the remainder of the programmed low speed time period. While this time clock will override the high speed timeclock (see above), there are several reasons why the pump will automatically switch to high speed operation during this programmed time period. These include manual operation, spa operation, or heating operation. Set DSapyaa-nadll Time W6ed:0n0esPdtaoy 91:00:03P7P or Spa-wkend 6:00P to 9:00P Adjust time setting Move between start and stop times & to previous/next menu item Adjust time setting Move between start and stop times & to previous/next menu item Spa-wkday 6:00P to 9:00P Adjust time setting Move between start and stop times & to previous/next menu item This menu is only available if the system has been setup for "pool and spa-std". During the programmed spa time, the Aqua Plus 16v will move the pool/spa valves into the "spa-only" position and turn on the filter pump. The heater will automatically heat the spa up to the programmed spa temperature. This programmed spa operation will take precedence over all other automatic functions, only manual operation of the filter button or pool/spa valve button will override this function. If your pool has a separate jet pump or blower controlled by Aux1 and/or Aux2 , you will have to program those separately. Set LDigahytasn-dallTime W8e:d0n0ePsdtoay1110:0:307PP or Lights-wkend 8:00P to 11:00P Adjust time setting Move between start and stop times & to previous/next menu item Adjust time setting Move between start and stop times & to previous/next menu item Lights-wkday 8:00P to 11:00P Adjust time setting Move between start and stop times & to previous/next menu item This menu will appear only if the Lights are configured for timeclock. The lights will turn on and off at the designated times. The only override on this function is manual on/off control by the "Lights" or button. Lights-CountDn 0:20 Adjust time setting (Manual On/Off, 0:05, 0:10, 0:015...) Move to previous/next menu item This menu will appear only if the Lights are configured for countdown timer. This setting is the time after you manually turn on the lights until the Aqua Plus 16v automatically turns off the lights. You can also manually turn off the lights at an earlier time by pressing the LIGHTS button. 13