Hayward PL-PLUS Operation Manual - Page 18

NOTE: The configurations for Valve3 and Valve4 are identical. However, if Heater2 was enabled, then the Valve4 configuration will not appear (a single relay is used to implement either the Heater2 function or the Valve4 function--it can not do both). Set VDaalvyea3n-dallTime W8e:d3n0eAsdtaoy 41:00:03P7P or Valve3-wkend 8:30A to 4:00P Adjust time setting Move between start and stop times & to previous/next menu item Adjust time setting Move between start and stop times & to previous/next menu item Valve3-wkday 8:30A to 4:00P Adjust time setting Move between start and stop times & to previous/next menu item or This menu will appear only if Valve3 is configured for timeclock. The valve will rotate on and off at the designated times. SVeatlvDe3ay-CaonudnTtDimne Adjust time setting (Manual On/Off, 0:05, 0:10, 0:15...) Wednes0d:a2y010:37P Move to previous/next menu item This menu will appear only if the valve3 is configured for countdown timer. This setting is the time after you manually turn on the valve3 relay until the Aqua Plus 16v automatically turns off the relay. You can also manually turn off the valve at an earlier time by pressing the VALVE3 button. Super Chlorinate 24 hours Adjust Superchlorination period (1 - 96 hours) Move to previous/next menu item For larger pools or when you have an unusually high bather load, a large amount of rain, a cloudy water condition, or any other condition that requires a large amount of chlorine to be introduced to the pool, may require more hours of Superchlorination. Smaller pools require less hours of Superchlorination. Group Function The Aqua Plus 16v offers the ability to assign a Group function to a particular button. Instead of a button controlling one particular function, the button can be programmed to initiate a sequence of commands that are programmed in the Configuration Menu. For example, instead of the Lights button turning on and off the pool light only, the button can be programmed to turn on the pool light, turn on the bug light, turn off the pool cleaner, turn on and dim the patio lights, turn on the music, etc. all at the same time. This convenient feature is offered on all Aux buttons, both Valve buttons and the Lights button. The Aqua Plus 16v can be programmed to control up to four groups. Refer to this section when programming Group commands. Before assigning and configuring all the desired functions and their control parameters, the group itself must be configured. The options for controlling groups are Manual On/Off, Countdown Timer, and Timeclock. The group will turn on and off based on this selection. When setting up a Group function in the Configuration Menu, the first menu allows you to select the control parameter (how the group is activated and de-activated) and the second menu allows you to select which Aqua Plus 16v functions are to be controlled in the group. 15