Hayward Pool Vac XL All Models - Page 12
Wing Replacement
 |
View all Hayward Pool Vac XL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Pool Vac Ultra MAINTENANCE TIPS 3. WING REPLACEMENT a) Using a screwdriver, remove the plugs from both pods (see Figure 9). b) Remove the old wings by bending the wings up toward the sides of the cleaner, and lift them off their hooks (see Figure 10). If any of the wing hooks are broken, take the Pool Vac Ultra to your dealer for pod replacement as the unit will not function properly if the wings are not properly attached. c) Replace the wings, making sure that you match the "L" (Left) and "R" (Right) of the pods. d) Replace the pod plugs and tap them into place POD PLUG WEAR MARK Figure 9 Figure 10 10
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
-
21
-
22
-
23
-
24
 |
 |
10
Pool Vac Ultra
MAINTENANCE TIPS
3. WING REPLACEMENT
a) Using a screwdriver, remove the plugs from both pods
(see Figure 9)
.
b) Remove the old wings by bending the wings up toward the sides of the cleaner, and lift them off
their hooks
(see Figure 10)
. If any of the wing hooks are broken, take the Pool Vac Ultra to your dealer for
pod replacement as the unit will not function properly if the wings are not properly attached.
c) Replace the wings, making sure that you match the “L” (Left) and “R” (Right) of the pods.
d) Replace the pod plugs and tap them into place
Figure 9
POD PLUG
WEAR MARK
Figure 10