Hayward Pool Vac XL All Models - Page 9

Pool Vac Ultra IMPORTANT TIPS In one piece fiberglass pools there is very little dirt on the walls, but the Pool Vac Ultra will still climb the walls. Due to the shape (severe angles) of most in-ground vinyl liner pools, the Pool Vac Ultra 's cleaning is mostly confined to the bottom (both shallow and deep) and the hopper sides. However, normal dirt and debris do not adhere to these walls. DO NOT COIL HOSE When storing your cleaner the hose sections must be stored straight, not coiled. A coiled hose will create a memory in the hose that will impede the Pool Vac Ultra's ability to move properly in your pool. Coiled hoses are not covered under the Hayward warranty. When removing the Pool Vac Ultra from your pool, be sure to grasp the cleaner by its handle, not by its hose, otherwise your Pool Vac Ultra might be damaged should the hose disconnect from the cleaner. 1. Skimmers come in many configurations and cannot all be described here. Three basic types are discussed however. Some skimmers have two (2) holes in the bottom. There might be a valve, float or cover over the holes. Remove everything in the skimmer, exposing the holes. The rear hole is usually the suction port. In some cases it will be necessary to use the V094 Regulator Valve to control water flow through the Pool Vac Ultra (see Figure 4). Some skimmers have only one hole in the bottom. This suction port is usually controlled by a valve at the filter system and most likely will not need a V094 Regulator Valve (see Figure 3). 7