Hayward Pro Logic Model: PL-PS-4 PL-PS-8 PL-PS-16 PL-PS-16V Operation - Page 13
Gallons and Liters of Pool/Spa water - low salt level
View all Hayward Pro Logic manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
3600+ Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute Dilute OK 1067 (484) 100 0 (453) 933 (424) 867 (398) 800 (364) 733 (333) 667 (304) 600 (263) 533 (243) 467 (211) 40 0 (181) 333 (152) 267 (123) 200 (90) 133 (60) 6 7 (30) Ideal OK (460) 95 0 (430) 887 (403) 823 (378) 760 (346) 697 (317) 633 (289) 570 (259) 507 (231) 443 (201) 380 (172) 317 (144) 253 (117) 190 (86) 127 (57) 63 (29) Ideal OK OK OK 960 (436) 900 (408) 840 (382) 78 0 (358) 72 0 (328) 660 (300) 600 (274) 540 (246) 480 (219) 420 (190) 360 (163) 300 (137) 240 (110) 180 (81) 120 (54) 6 0 (27) Ideal 907 (412) 850 (385) 793 (360) 737 (337) 68 0 (310) 62 3 (283) 56 7 (258) 51 0 (232) 453 (207) 397 (180) 34 0 (154) 283 (129) 22 7 (104) 170 (77) 11 3 (51) 5 7 (26) Ideal 854 (388) 800 (363) 747 (339) 693 (317) 64 0 (291) 58 7 (267) 53 3 (243) 48 0 (218) 427 (195) 373 (169) 320 (145) 267 (121) 21 3 (98) 160 (73) 10 7 (48) 5 3 (24) Ideal OK 80 0 (364) 75 0 (341) 70 0 (318) 65 0 (297) 600 (273) 550 (250) 500 (227) 450 (205) 40 0 (182) 350 (159) 30 0 (136) 250 (114) 200 (91) 15 0 (68) 10 0 (45) 5 0 (23) Ideal OK 747 (339) 700 (318) 653 (297) 607 (276) 56 0 (255) 51 3 (233) 46 7 (212) 42 0 (191) 373 (170) 327 (148) 28 0 (127) 23 3 (106) 18 7 (85) 14 0 (64) 9 3 (42) 4 7 (21) Ideal OK OK OK OK OK OK OK OK OK OK 693 (315) 650 (295) 607 (276) 563 (256) 52 0 (236) 47 7 (217) 43 3 (197) 39 0 (177) 34 7 (158) 303 (138) 260 (118) 217 (98) 173 (79) 130 (59) 8 7 (39) 4 3 (20) Ideal 640 (291) 600 (273) 560 (255) 520 (236) 48 0 (218) 44 0 (200) 40 0 (182) 36 0 (164) 320 (145) 280 (127) 240 (109) 200 (91) 160 (73) 120 (55) 8 0 (36) 4 0 (18) Ideal ppm (30,000) (37,500) (45000) (52,500) (60,000) (67,500) (75,000) (82,500) (90,000) (97,500) (105,000)(112,500)(120,000)(127,500)(135,000)(142,500)(150,000) 8,000 10,000 12,000 14,000 16,000 18,000 20,000 22,000 24,000 26,000 28,000 30,000 32,000 34,000 36,000 38,000 40,000 587 (267) 550 (250) 513 (233) 477 (217) 44 0 (200) 40 3 (183) 36 7 (167) 33 0 (150) 293 (133) 257 (117) 220 (100) 18 3 (83) 14 7 (67) 11 0 (50) 7 3 (33) 3 7 (17) Ideal Gallons and (Liters) of Pool/Spa water POUNDS and (Kg) OF SALT NEEDED FOR 3200 PPM When you have an unusually high bather load, a large amount of rain, a cloudy water condition, or any other condition that requires a large amount of chlorine to be introduced to the pool, activate the Pro Logic Super Chlorinate function. The Pro Logic will turn on the filter pump, set the pool/spa valves to the correct position, and set the chlorine generator to maximum output. The superchlorinate function will continue for the programmed number of hours (see Timers/Super Chlorinate Hours) overriding the normal filter pump timeclock settings. At the end of the super chlorinate period, the pool will return to normal operation. If you manually turn off the filter pump (using the "FILTER" button on any display/keypad), the super chlorinate function terminates. When you turn the filter pump back on, super chlorinate will resume for the balance of the programmed number of hours. Spa Chlorinator 3% Adjust the desired chlorinator output for spa (0,1,2,3...9,10,15,20...95,100%) Move to previous/next menu item This setting will appear only if the chlorinator function is enabled and system has been setup for "spa only" or "pool and spa-std". If an AQL-CHEM is being used, super chlorinate will not be available if chemical sensing is enabled and ORP is in Auto Sensing (see AQL-CHEM manual). It will determine the chlorinator output when the system is operating in spa-only mode. The actual amount of chlorine introduced into the spa is determined by: this setting, the amount of time the pool operates in spa-only mode, the water temperature, and the amount of salt in the water. If the filter pump is running due to the freeze protection feature, then the chlorinator will not operate during this time. Pool Chlorinator 60% Adjust the desired chlorinator output for pool (0,1,2,3...9,10,15,20...95,100%) Move to previous/next menu item This setting will appear only if the chlorinator function is enabled and system has been setup for "pool only" or "pool and spa". If an AQL-CHEM is being used, super chlorinate will not be available if chemical sensing is enabled and ORP is in Auto Sensing (see AQL-CHEM manual). It will determine the chlorinator output when the system is operating in pool-only or spa spillover modes. The actual amount of chlorine introduced into the pool is determined by: this setting, the amount of time the filter pump is running, the water temperature, and the amount of salt in the water. If the filter pump is running due to the freeze protection feature, then the chlorinator will not operate during this time. Pool High Speed 100% Adjust the desired high speed for variable speed operation Move to previous/next menu item This setting will appear if "spa only" is not selected and variable speed filter pump is enabled. This setting determines the speed of the pump during high speed pool or spillover operation. This value can be set from 20% to "Highest Speed" in 5% increments. "Highest Speed" is default. For PS models using dual equipment, this is the pool filter high speed. Pool Low Speed 50% Adjust the desired low speed for variable speed operation Move to previous/next menu item This setting will appear if "spa only" is not selected and variable speed filter pump is enabled. This setting determines the speed of the pump during low speed pool or spillover operation. This value can be set from "Lowest Speed" to 50% in 5% increments. 50% is default. For PS models using dual equipment, this is the pool filter low speed. if Aux1 is configured as "ColorLogic" Aux1 Settings Push to access ColorLogic settings + to view/change Move to previous/next menu item This menu will appear if an aux has been configured as "ColorLogic". Use this menu to select custom colors and lightshows for your networked ColorLogic lights. Refer to the AQL-COLOR-MODHV manual for specific information on these settings. (242) 500 (227) 467 (212) 433 (197) 40 0 (182) 36 7 (167) 33 3 (152) 30 0 (136) 267 (121) 233 (106) 20 0 (91) 167 (76) 13 3 (61) 100 (45) 6 7 (30) 3 3 (15) Ideal 480 (218) 450 (205) 420 (191) 390 (177) 36 0 (164) 33 0 (150) 30 0 (136) 27 0 (123) 240 (109) 210 (95) 180 (82) 150 (68) 120 (55) 9 0 (41) 6 0 (27) 3 0 (14) Ideal 427 (194) 400 (182) 373 (170) 347 (158) 32 0 (145) 29 3 (133) 26 7 (121) 24 0 (109) 213 (97) 187 (85) 160 (73) 133 (61) 10 7 (48) 8 0 (36) 5 3 (24) 2 7 (12) Ideal 373 (170) 350 (159) 327 (148) 303 (138) 28 0 (127) 25 7 (117) 23 3 (106) 21 0 (95) 187 (85) 16 3 (74) 14 0 (64) 11 7 (53) 9 3 (42) (32) 4 7 (21) 2 3 (11) Ideal 320 (145) 300 (136) 280 (127) 260 (118) 24 0 (109) 22 0 (100) 20 0 (91) 18 0 (82) 16 0 (73) 14 0 (64) 120 (55) 100 (45) 8 0 (36) 6 0 (27) 4 0 (18) 2 0 (9) Ideal 26 7 (121) 25 0 (114) 23 3 (106) 217 (98) 200 (91) 183 (83) 167 (76) 150 (68) 13 3 (61) 11 7 (53) 100 (45) 8 3 (38) 6 7 (30) 5 0 (23) 3 3 (15) 1 7 (8) Ideal 213 (97) 200 (91) 187 (85) 173 (79) 160 (73) 147 (67) 13 3 (61) 12 0 (55) 107 (48) 9 3 (42) 8 0 (36) 6 7 (30) 5 3 (24) 4 0 (18) 2 7 (12) 1 3 (6) Ideal 3400 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 level Current salt 37 10