Hayward Super Pump® VS Super Pump® VS Manual - Page 22
Warranty
View all Hayward Super Pump® VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
11.2. Error Codes In the case that an internal failure has been detected the pump will turn the motor off and display an error code listed below. If more than one error has been detected the screen will flash between the errors. The cause of the error should be investigated and resolved before continuing normal operation of the pump. When the issue has been resolved, press the RUN / STOP key to clear the error message. Screen Buttons Used Comments Error Number Detected Code: 01 02 10 20 64 97 98 Indications: Undervoltage on DC-Link Overvoltage on DC-Link Current Measurement Fails Permanently Overload During Start Up Process Short Circuit Failure Multiple Errors at the Same Time, i.e. Undervoltage and Overload Error Communication Failure From controller 12. Warranty Page 22 of 24 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS Super Pump Variable Speed Pump IS2600VSP Rev C