Hayward TriStar® VS Owners Manual - Page 9
TriStar Variable Speed Pump Control, USE ONLY HAYWARD GENUINE REPLACEMENT PARTS, VARIABLE SPEED
View all Hayward TriStar® VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
TriStar Variable Speed Pump Control ____ Page 9 of 16 VARIABLE SPEED INTERFACE - INSTALLER SETUP CHART Event Normal operation - any mode except prime Performed function Operate according to active mode with % flow set for this mode and for preset time. Keypad active functions Press 3 and 4 simultaneously for more than 5 seconds to enter setup mode. The current active mode is continued without any change or interruption. Display message *SETUP-MAIN MENU SETUP mode User keypad and Press 1 (Exit) to exit setup. display are in setup System will return to current mode. The current active mode and current preset is active pump mode is displayed, for example "P2.LOW continued without any FILTER". change or interruption. P2. LOW FILTER (for example) SETUP mode (continued) (as above) Press 5 (Next) or 2 (Prev) to scroll through all available main menu options. See display for current menu option. *LANGUAGE SETUP *CLOCK/TIMER *PRIME HEIGHT *PRESET SETUP *SEQUENCER *RANGE SETUP *HARDWARE SETUP *CONTROL SETUP SETUP mode (continued) (as above) Press 6 (OK) to enter selected menu option, for example "LANGUAGE SETUP". *LANGUAGE SETUP *ENGLISH Press 1 (Exit) to exit the menu. SETUP mode: LANGUAGE SETUP function This feature allows setting desired language of displayed messages. Press Time Up/Dn buttons to select desired language. Press 6 (OK) to store current settings. *ENGLISH *ESPANIOL *FRENCH *ENGLISH SET! SETUP mode: CLOCK/TIMER function This menu allows the user to set the current day of week and time of day, as well as enable or disable the timer function, and define the timer "on" and "off" time. To change day of week or time of day, confirm by pressing 6 (OK) button. An underlining cursor will appear below day-of-week value. *SET Sun 7:36pm (for example) Press 5 (Next) or 2 (Prev) to select either day-of-week, hours, or minutes with underlining cursor. Press Time Up/Dn buttons to change selected value. *SET Sun 7:36pm *SET Sun 7:36pm *SET Sun 7:36pm Pressing 6 (OK) causes system to *CLOCK SAVED! store preset current time. Pressing 5 (Next) allows the user *TIMER ENABLED to enable or disable the Timer. *TIMER DISABLED Use Time Up/Dn buttons to select between Timer Enable or Timer Disable. Pressing 6 (OK) causes *TIMER SAVED! system to store this option. WWW.HAYWARDPOOL.COM USE ONLY HAYWARD GENUINE REPLACEMENT PARTS