Hayward W3SP3206VSP TriStar VS 950 - Owners Manual - Page 24

Screen 21. Reset all settings? + yes or - no 22. Are you sure? + yes or - no 23. Use Timers Menu to set daily timers Buttons Used + < > + < > Comments Use + to reset to factory default settings Use > to skip reset Confirm reset of all parameters Move to next menu item 6.7. Timer Menu Screen 1. Timer Menu Press > to enter Buttons Used < > Comments Use > to enter Timer Menu 2. Press +/- to change or > view next item 3. Timer 1 1725rpm 12:00a to 11:45p 4. Press + to change or > next timer + - Use + to change displayed timer < > Use > to skip to next timer 5. T1: Timer 1 +/- rename; speed > + < > Use + to rename timer Use > to set motor speed for timer 6. Timer 1 1725rpm +/- adjust; times > + < > Use to set speed for timer Use > to set start/stop time 7. Timer 1 1725rpm 8:00a to 6:00p + - Use to set start/stop time for timer < > Use > to choose days of operation for timer 8. Choose Days 7D 7 days a week + - Use to choose days of operation for timer < > Move to next menu item Note: When start/stop times are set to be the same, the timer is deactivated. Each timer can be set to run on specific days of the week. Options are to run 7 days per week, 5 days per week (Monday thru Friday), or on a single day (Monday thru Sunday). Each timer is set up in this same manner. If the timers are set up such that their run times overlap, the timers will run in priority from Timer 1 to Timer 8. In other words, if Timer 1 is set to run from 8:00 am to 12:00 pm, and Timer 2 is set to run from 10:00 am to 2:00 pm, the pump will run Timer 1 from 8:00 am to 12:00 pm, and will then switch to run Timer 2 until 2:00 pm. Default setting for Timer 1 is to start at 12:00 am, and end at 11:45 pm. When Remote Control Mode is set to Relay Control, the speed for Timer 1 may be set to 0 rpm to allow the pump to be stopped without having to remove power. Page 24 of 36 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS 2.70 THP VS Pump Family IS3206VSP3 Rev-B